# Sample configuration file for the HP720
#
# This file will be automatically read upon startup if it's placed in
# /etc/pnm2ppa.conf
#

# YOU MUST CHOOSE ONE OF THE FOLLOWING, EVEN IF YOU DO NOTHING ELSE!
# 
# if there's more than one version, the last "version" will be used
# 

version   ERROR
#version  720	# 710, 712, 722 also acceptable
#version  820
#version 1000

# If you'd like output to appear on the screen as well as
# syslog, uncomment the following line or use --verbose
# on the command line. This has no effect on DEBUG builds
# Also, it doesn't produce any more output. 
#
# XXX for now, leave the "1" in there or else it doesn't work

#verbose 1

# Papersize : make sure GhostScript (or whatever agrees with this)
# valid choices include: a4, us or letter, legal

#papersize a4
#papersize letter 
#papersize legal

# Vertical and Horizontal Offsets
# adjust to suit your printer 
# XXX - Please report back to ppa.devel@listbot.com with your printer
# XXX - and values that work for you!

# 710 values -10 to -12 seem about right

#ColOffsX	-12
#ColOffsY	41

# 820 values

#ColOffsX	35
#ColOffsY	43

# 1000 values anyone?
#ColOffsX	35
#ColOffsY	43

# Gamma correction values for Red, Green and Blue channel:
# to find it type pnm2ppa -c -i - -o /dev/lp0 (or whatever printer device you use;
# check the resulting sheet against the produced file "gamma.ppm" and 
# put here the index number of the best matching bands.
#
# Please remember: first band index number is 0 !!

RedGammaIdx	6
GreenGammaIdx	3
BlueGammaIdx	3

#
# The following settings are for tweaking only. They are the defaults
# for each type of printer. Adjust only if you need to.
#

# for the 7x0 series

#xoff     169    # \ Adjust these for your printer.
#yoff    -600    # / (see CALIBRATE)
# 1/4 inch margins all around (at 600 DPI)
#top      150 
#bottom   150
#left     150
#right    150

# for the 820 series

#xoff     75    # \ Adjust these for your printer.
#yoff    -500    # / (see CALIBRATE)
# 1/4 inch margins all around (at 600 DPI)
#top      80 
#bottom   150
#left     80
#right    80

# for the 1000 series

#xoff     100    # \ Adjust these for your printer.
#yoff    -650    # / (see CALIBRATE)
# 1/4 inch margins all around (at 600 DPI)
#top      150 
#bottom   150
#left     150
#right    150


